We offer comprehensive supply in terms of types of sewage wells, namely: - non-manhole wells / inspection wells of diameters ranging from 300 to 700 mm - used in sewage systems, industrial, stormwater, general floatable, drainage, located both on a strip of road, on the road and outside the road and on green areas (depending on the location we use different types of tops: PP light covers, concrete cones with concrete lids, iron maholes). Depending on the material and technology of sewage pipelines, the lower part of wells - may have different design, suitable for installation of pipes, for example, plain or corrugated PVC / PP. The arising pipe again depending on the technology can be smooth or corrugated, making manhole transfer the load exerted by the ground. Wells are working together with the soil showing their flexibility at the same time. Non-manhole wells allow you to conduct work in service, inspection, washing individual sections of the canals only from the ground level.

Our wells have technical approvals of Roads and Bridges Research Institute, Center of Research and Technology Development of Installation- INSTAL - and positive opinion of the Central Mining Institute (all Polish approvals).

- wells without clarifier used as a pit to the lateral canals, collectors, ports
- wells with the clarifier used widely in the rain sewer with the rain joints and in drainage systems






- wells with its blank bottom or simply with a cap - used as a small pumping stations, tanks or water meter wells - wells with manhole of diameters ranging from 800 to even 3500 mm, for carrying out any work from the bottom of the well, the design of AMARGO well may be in three main variants, namely prefabricated wells - each consisting of a prefabricated polypropylene elements designed by the technology of incjection to the form – of the type of wheel bottom, ring, cone, relief ring, cast iron manhole DN 600 or polyethylene wells constructed as a monolith from form by a rotational molding technique, or the last option giving the greatest potential - Prefabricated wells – welded extrusively on the basis of rings PE / PP DN 1000 and 1200 mm or a corrugated structural tubes of stiffness SN2, SN4, SN8. In addition, plates in flat sheets of polyethylene PE HD, PP-C PP/PP-H are used, as well as welding wires of round profile 3, 4 or 5 mm and manhole steps. The whole is welded in the process of extrusion welding with an extruder and are suitable ports are welded into creating the wheel bottom according to the order form. If there is a need to weigh the well - especially when assembling and operation is carried out in areas with high levels of ground water so-called double bottom can be made for subsequent filling with concrete and assembly hooks for anchor can be welded.

The third option - well PE HD welded extrusively there are no special standards and typical production – for storage. Wells are manufactured under a specific order of the Customer, and feasibility is practically limitless. This allows dummy or special wells of this type to be used as a cascade, buffer tanks, professional pumping stations, watermeter chambers or field valves stations.

With the completion of deliveries we also offer wells and tanks of materials other than those produced by AMARGO, which are mainly:
- wells of a polyester resin with stiffness of SN10000 N/m2 cut glass fiber reinforced and with fillings in the form of calcium carbonate and quartz sand. As a protection against rubbing tubes they have the inner layer of clear resin with a thickness of at least 1 mm
- concrete and reinforced concrete wells.

Thus, in order to present you with an attractive commercial offer, please send the inquiry by fax or e-mail stating the required components and materials specified. We will reply as soon as possible sending you a total value.

If you are interested in the production of polyethylene or polypropylene wells on your own you are at the very right place! We will provide you with this set of necessary materials, equipment for welding materials, and valuable practical advice, guidance and rules for joining - welding of elements of plastic PE/PP.

WE INVITE YOU